US Office
4258 West 12th Street
Erie, PA 16505
United States (814) 835 0621

EasyLog | EL-21CFR-2-LCD

21CFR Temperature and Humidity Data Logger with USB and LCD
  • easylog-data-logger-EL-21CFR-2-LCD-Angle-Lid-On-Logo.jpg (2)
  • easylog-data-logger-EL-21CFR-2-LCD-Straight.jpg (1)
  • easylog-data-logger-EL-21CFR-2-LCD-Angle-Lid-Off.jpg (1)
  • easylog-data-logger-EL-21CFR-2-LCD-in-PC.jpg (1)
  • easylog-data-logger-EL-21CFR-2-LCD-Angle-Lid-On-Logo.jpg (2)
  • easylog-data-logger-EL-21CFR-2-LCD-Straight.jpg (1)
  • easylog-data-logger-EL-21CFR-2-LCD-Angle-Lid-Off.jpg (1)
  • easylog-data-logger-EL-21CFR-2-LCD-in-PC.jpg (1)


This 21 CFR Part 11 compliant standalone data logger measures more than 16,000 readings over a -35 to +80°C (-31 to +176°­­F) and 0 to 100% relative humidity (RH) range. At the touch of a button, use the on-board display to cycle between the current, minimum and maximum logs seen during the session for both temperature and humidity.

Why buy a 21CFR logger?
The 21 CFR Part 11 regulations issued by the US Food and Drug Administration (FDA) give the criteria under which electronic records can be considered by the FDA as equivalent to paper records. If you need to meet these regulations or have enhanced data security requirements then you should choose one of our 21CFR loggers, otherwise our standard loggers will suffice. Learn more about 21 CFR Part 11.

Used in conjunction with Lascar's 21CFR Part 11 software, the logger enjoys all of the core offerings of the original EasyLog software, but with additional 21CFR characteristics including user permissions, encrypted data which cannot be edited, full audit trail and electronic signatures for all activity.

Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free 21CFR Part 11 software provided. Supplied with ½ AA battery and wall mount clip.

This product complies with BS EN 12830:2018 (Temperature recorders for the transport, storage, and distribution of temperature-sensitive goods).

PLEASE NOTE: You can add up to TWO SPARE BATTERIES for every data logger ordered.  If you wish to order more than this quantity, please contact your local sales office for special shipping information.


Measurement range
-35°C to 80°C (-31°F to 176°F)
Internal resolution
0.5°C (1°F)
Accuracy (overall error)
0.55°C (1.04°F) typical (5 to 60°C)
Long term stability
<0.02°C (0.04°F) / year
Relative Humidity:
Measurement range
0 to 100%RH
Internal resolution
Accuracy (overall error)
2.25%RH typical (20 to 80%RH)
Long term stability
<0.25%RH / year
Logging Rate
User selectable between 10 seconds and 12 hours
Battery Life
2 Years
Calibration Certificate



Could you explain what 21CFR Part 11 is?

Why aren't my batteries working?

More support


Calibration certificates are available to purchase separately and are traceable to international standards depending on your location.


The EL-21CFR-2-LCD temperature and humidity data logger has been specifically developed to meet the data security required by the FDA's 21CFR part 11 regulations. As such it is suitable for use in applications where the integrity of the data is of the highest importance.

For application stories on our data loggers, visit our case studies section.



BAT 3V6 1/2AA
BAT 3V6 1/2AA Battery


CAL-TEMP-RH (+20°C@40%RH) adds 15 days
Single-point, NIST calibration test certificate.


CAL-TEMP-RH (+25°C@50%RH) adds 15 days
Single-point, NIST calibration test certificate.


CAL-TEMP-RH (+35°C@60%RH) adds 15 days
Single-point, calibration test certificate.

You may also like…

easylog-data-logger-EL-21CFR-1-LCD-Angle-Shot-Lid-On-Logo.jpg (1)

21CFR Temperature Data Logger with Display

easylog-data-logger-EL-21CFR-2-LCD+-Angle-Lid-On.jpg (2)

21CFR High Accuracy Temp & RH Data Logger

easylog-data-logger-EL-21CFR-TP-LCD-Angle-Lid-On-Thumb.jpg (1)

21CFR USB Thermistor Probe Logger with Display

easylog-data-logger-EL-21CFR-TP-LCD+-Angle-Lid-On.jpg (1)

21CFR USB High Accuracy Thermistor Probe Logger with Display

if (isPanelInstrument && (stockInfo != null && stockInfo.AvailableStock > 0) && region == "US") { }