The EL-SIE-2 is an temperature and relative humidity USB data logger. Configuration is very easy. With no software to install, just connect the data logger with the USB cable and use the web-browser to configure the device. 

The EL-USB-TC-LCD is a thermocouple temperature data logger with an LCD display. This standalone temperature data logger measures over 32,000 readings from inter-changeable J, K or T type thermocouples.

The EL-SIE-2 is a high accuracy temperature and relative humidity USB data logger. Configuration is very easy. With no software to install, just connect the data logger with the USB cable and use the web-browser to configure the device. 

This standalone data logger measures and stores up to 32,510 Carbon Monoxide (CO) readings over a 3 to 1000ppm measurement range and -10 to +40°C (14 to +104°F) operating temperature range.

This standalone data logger measures more than 32,000 readings over a 4-20mA d.c. measurement range.

This standalone data logger can record up to 32,510 events, state changes and count events.

The EL-SIE-6+ is a pressure, temperature and relative humidity USB data logger. Configuration is very easy. With no software to install, just connect the data logger with the USB cable and use the web-browser to configure the device. 

The EL-USB-TC-LCD is a thermocouple temperature data logger. This standalone temperature data logger measures over 32,000 readings from inter-changeable J, K or T type thermocouples.

Available in packs of 10, the EL-PDF-1-004 PK10 Ambient Pharma Goods data logger comes pre-configured with High 25°C, Low 8°C Alarms - simply press the button to start logging.  Once your session is complete, press the Stop button and insert the logger into your PC’s USB port.  No special software is required, the logger automatically generates a pdf report which can be copied off the device as if it were a memory stick. A cumulative alarm feature is also available upon request.